Gravity Conveyors

LogistiQ conveyors are built to order based on our customer’s specifications. This approach allows us to provide equipment that is exactly as needed with short lead times. Leading the conveyor industry in built-to-order equipment, LogistiQ’s wide range of sizes and options allow us to offer as our standard product what our competitors would consider special equipment. Our material handling equipment is divided into the following product classes: Gravity Conveyors, Power Conveyors and Chutes.

Non-powered roller conveyors or Gravity Conveyors are the most economical and common method of conveying unit loads. These conveyors are typically mounted on a slight decline angle, therefore using gravity to assist product movement, especially for long distances. They can also be used in applications where the conveyor is level and operators can push the product along to its final destination, allowing for multiple workstations, if needed.

Portable T-Sort Roller Conveyor With & Without Chutes, Up To 60 Ft Long

We developed the Portable T-Sort Roller Conveyor to support customers in quickly expanding their existing manual sort capabilities. Its flexible features allow operators to easily move the large 12 ft long portable conveyor components to a desired location, lock them in place, & extend their length to 20 feet. Multiple segments can achieve as much as 60 feet total extended lengths! The spring loaded chute on the base section is lined with UHMW & can be tilted to connect to an adjoining conveyor at 90 degrees, offering a low friction sorting surface to the newly created conveyor lane. Customers have reported significant increases in productivity related to the deployment of these relatively low cost units to existing operations, without the need for disruptive, & expensive system expansions.
  • • WIDTH BETWEEN FRAMES: 42”
    • LENGTH, COLLAPSED: 144”
    • STANDARD LENGTH, EXTENDED: Standard 240”
    *Self-tracking extension & retraction
    • PIVOTING LENGTH, EXTENDED: Chute 288.25” • CHUTE: UHMW Lined
    • ELEVATION: 33” +/- 3”
    • ROLLER TYPE: 1.90” Dia, 12ga galvanized rollers
    • ROLLER CENTERS: 2.25”
    • FRAME: Ergo-friendly design, powder finish
    • SUPPORTS: Heavy-duty supports & swivel caster with wheel lock (discharge end only)
• Available in (3) 20 ft Extendable Mating Sections
• 8” Offset Heavy Duty Swivel Locking Casters allow for Easy Maneuvering
• Torsion Spring Loaded Pivoting Chute
• Dual Lane 1.9 16g Rollers on 2.25 Centers
• Easy in & Out Extension
• Manual Sort Operations
• Loading & Unloading Transport Vehicles
DOWNLOAD PRODUCT SHEET

Finger Bridge Multi-Lane Extendable Gravity Conveyor

Many sorting facilities have multiple docks receiving or loading packages to & from trailers. In sorting facilities with multiple docks, the need for an aisle way along collector conveyors poses ergonomic challenges. To address this, we developed the Finger Bridge—an extendable solution that closes the surface gap. The retractable fingers, with heavy-duty rollers, create a level surface, eliminating the safety concern of lifting heavy packages over the gap. Operators can efficiently sort packages without lifting & quickly close the unit for egress if needed. The multi-lane design allows easy package orientation for seamless flow onto inbound/outbound conveyors, earning appreciation from operators for its ergonomic benefits.
• WIDTH: 33” / 45”
*Width is determined by package size, available conveying area, & application-specific needs
• LENGTH, COLLAPSED: 87.5”
• LENGTH, EXTENDED: 133.5”
• LENGTH, COLLAPSED: 99.5”
• LENGTH, EXTENDED: 159”.5
• ROLLER CENTERS: 3”
• ELEVATION: 33” + / - 3”
• SUPPORTS: Heavy-duty Leg supports
Heavy-duty swivel caster with wheel lock (discharge end only). Self-tracking extension & retraction
• ROLLER TYPE: Standard galvanized roller options:
• 1.90” diameter, 12 ga. wall tube with 7/16”
• Hex cold rolled steel axles, spring retained
• 2.5” diameter, 11 ga. wall tube with 11/16”
• Hex cold rolled steel axles, spring retained
• Standard bearings are Semi-precision
• Extendable Conveyor that maintains same surface elevation
• Allows for easy egress to aisle ways with extendable fingers
• Due to construction, provides easy maneuverability for all package sizes
• Multi Lane Gravity Roller Conveyor; 1.9 12g rollers on 2.25 centers
• Swivel lock casters allow for easy extending
• Heavy Duty impact pan to protect the conveyor in robust handling applications
• Dock Doors
• Aisle Ways
• Large Package Handling
• Egress In Lieu of Cross-Over/Stairways
DOWNLOAD PRODUCT SHEET
Gravity Conveyors

Contact Us

Tell us your business challenges and needs and we'll get back to you ASAP!

CONTACT US