Power Conveyors

The Powered Round Belt Drive Conveyor is a quiet and efficient live roller conveyor system. These systems are primarily suitable for lighter loads up to 75 pounds. Each roller is powered individually by a composite “O” ring or band with up to (16) rollers connected to a single 24v flat motor with integrated control cards. With the goal being simple to install, these conveyers are commonly used in zero pressure accumulation applications, integrated with pop-up transfers, curves or spurs.

Portable T-Sort Powered Belt Conveyor

Belt Width: 35.5”
Length without chute: 192”
Length with chute: 288.25”
Motor: 1 HP
Speed: 60 fpm
  • Reversible Direction
  • Variable Speed
  • Manual Sort Operations
  • Loading & unloading Transport Vehicles
Often, Distribution and Sort facilities require special help handing oversize, or heavy packages. Sometimes these packages cannot travel certain areas of the conveyor system and need to be loaded or off loaded in different areas of the facilities. From time to time, creative methods for loading or unloading trailers or vans are required as well.
We developed a Portable T-Sort Powered Belt Conveyor with a mating portable gravity section designed for mobility. This heavy-duty unit is remarkable easy to move, and offers a simple and effective means to handle difficult to convey products in sorting, loading, or unloading applications. The UHMW lined Chute provides a low friction surface at interface points, allowing operators to easily transfer these challenging items on or off the adjoining surfaces. The unit is driven with a 2 HP reversible motorized pulley that uses 115V, 1ph power. Its 20 ft long power cord is supplied with a twist lock plug that stays put. This conveyor is a multi-use unit that is easily deployed for whatever your special use needs might be.
  • 8” Offset Heavy Duty Swivel locking casters allow for easy maneuvering
  • Reversable incline/decline
  • Lift Gate for Egress access
  • 115 V Single phase power
  • Removable side rails for oversized packages
  • Optional gravity roller in-feed conveyor
  • Plug & Play Electrical connections
  • Variable Speed
STANDARD FEATURES
  • Elevation: 31” infeed and 54” discharge
  • Heavy-duty Leg supports with swivel caster and wheel lock
  • Removable guardrail
WARRANTY
  • Mechanical: 12 Months
SERVICES AVAILABLE
  • Technical Support
  • Installation & Setup
  • Service Maintenance
  • Application Support
  • Hardware Support

Modular Portable Roller Conveyor

CONVEYING WIDTH: 36” or 48”
The effective conveying width is determined by package size, available floor space, and application specific needs.

CONVEYING ELEVATION: 24” – 48”
Standard conveying elevation is 32”, but load and unload areas can be lower or higher as needed. Elevations higher and lower than this range can be achieved on a custom basis.

LENGTH (straight): 60” / 120”
The standard individual straight section is 120” long; these can be coupled together for runs of any length needed. Lengths other than the standard 60” and 120” are available on a custom basis but need to be divisible by the roller centers.

DEGREE (curved): 30° / 45° / 60° / 90°
90° turns are standard on most systems, but 30°, 45°, and 60° turns are available as needed for special layout situations
Our MPRC technology can be applied throughout your operation in a variety of ways:
  • Transportation
  • Sortation
  • Merging
  • Dock Delivery
  • Zone Accumulation
  • Gapping
  • Splitting
  • Parcel Fulfillment
Keeping up with the continually changing and ever-growing retail, e-commerce and distribution industries can be a daunting task as you strive to stay ahead of the pack. The traditional fixed positioned conveying systems are designed to carry out a single process, limiting flexibility required for ever-changing demand.
We developed an innovative modular conveyor system that is configurable, portable, quiet, durable and cost-effective. Our Modular Portable Roller Conveyor (MPRC) system can connect in straight runs up to 80 feet with a single 110v power drop. The system can combine with powered curves to maneuverer around existing equipment or building structures. Our configurable conveying system can provide you with the flexibility you need to manage ever-changing markets.
  • Safe – no guarding
  • Portable
  • Configurable/re-configurable
  • 110v single phase power req.
  • Reversible
  • Variable speed
  • Close Roller Centers
  • Fully assembled for easy installation
  • Plug and play
  • Low maintenance; requires minimal spare parts
  • Smooth operation
  • Quiet
  • Heavy Duty Steel Construction
  • Modular components designed for quick system configuration and installation
  • Configurations for manual divert and sorting
STANDARD FEATURES
  • Elevation: 24” – 48”
  • Speed: 30-180 FPM
  • Roller Centers: 3”
  • Frame: Channel with ergonomic friendly return flanges
  • Motor: 90 VDC
  • Rollers: 1.9 diameter, 16 gage galvanized tube with ABEC precision bearings, spring retained axle
  • Supports: 10’ standard, retractable design
  • Frame Finish: Light Gray Powder Coat, other colors available in quantity orders
  • Power: 120 Volt, Single Phase, 60 hertz
OPTIONS
  • Non-powered roller conveyor
  • Other Lengths based on roller space increments
  • 2.105” roller centers for small packages
  • Urethane rollers for up to 8 degree incline/decline
  • Frame protected O-Rings (MPRC+)
  • Brushless DC motors with Ethernet IP connectivity
  • Elevated supports
ACCESSORIES
  • Side Guards, UHMW lined or high density wheel lined
  • Merge and Aligner angled roller configurations
  • Divert devices
  • Impact carts for loading
  • Remote or Centralized PLC/HMI system controls

Flexible Portable Roller Conveyor

Width: 18” / 24” / 30”
Determined by package size, available conveying area and application specific needs.
Lengths: 12’ – 80’
Determine total length needed, including curvatures and obstructions.
Elevation: 24” – 48”, fixed height
Rollers: 1.50” / 1.90” diameter
  • Transportation
  • Sortation
  • Merging
  • Dock Delivery
  • Zone Accumulation
  • Gapping
  • Splitting
  • Parcel Fulfillment
Keeping up with the continually changing and ever-growing retail, e-commerce and distribution industries can be a daunting task as you strive to stay ahead of the pack. The traditional fixed positioned conveying systems are designed to carry out a single process limiting flexibility required for ever-changing demand.
  • Retail
  • E-commerce
  • Distribution
  • Warehousing
  • Manufacturing
  • Order Fulfillment
  • Parcel Handling
We developed an innovative flexible conveyor system that is expandable, portable, quiet, durable, and cost-effective. Our Flexible Portable Roller Conveyor (FPRC) system can connect in runs up to 80 feet with a single 110v power drop. This versatile system can zig-zag to maneuver around existing equipment or building structures, allowing the creation of a temporary conveyor line to meet ever-changing needs. To complement this system, we developed an innovative powered assist drive to allow the operator to easily manuever the conveyor line. Our flexible conveying system can provide you with the solution you need to manage ever-changing markets.
  • Safe – no guarding
  • Portable
  • Configurable
  • 110v single phase power req.
  • Reversible
  • Variable speed
  • Power Assist
  • Fully assembled for easy installation
  • Plug and play
  • Low maintenance; requires minimal spare parts
  • Smooth operation
  • Quiet
STANDARD FEATURES
  • Rollers: Standard galvanized roller – 1.50” or 1.90” diameter, 16 ga wall tube with 5/16” or 7/16” cold rolled steel axles, spring retained. Standard bearings are ABEC precision, grease packed.
  • Effective Width: 18”, 24”, 30”
  • Elevation: 24” – 48”, Fixed Height
  • Length: 12’ – 80’
  • Speed: 20-150 FPM
  • Roller Centers: 3”, 4”, 5", 5 1/4”
  • Drive: Located on support structure between frames and between supports for zone accumulation
  • Frame: Steel Side links with all bolted construction
  • Motor: 90 VDC, up to (16) per power supply
  • Support Centers: Heavy duty supports on 6” x 2” or 8” x 2” swivel casters
  • Frame Finish: Standard finish is Zinc Plated Side Plate with supports powder-coated Light Grey. Optional colors include green, beige, gray, orange, black and yellow.
  • Power: 120 Volt, Single Phase, 60 hertz
HEAVY DUTY STEEL CONSTRUCTION
  • Modular components designed for quick system configuration and installation
WARRANTY
  • Mechanical: 12 Months
SERVICES AVAILABLE
  • Technical Support
  • Installation & Setup
  • Service Maintenance
  • Application Support
  • Hardware Support

Contact Us

Tell us your business challenges and needs and we'll get back to you ASAP!